manualshive.com logo in svg

D-Link DIR-822, User Manual

The D-Link DIR-822 is a versatile and high-performance router, equipped with advanced features to enhance your internet connectivity. To make the most of its capabilities, easily access the comprehensive User Manual, available for free download on our website. Unlock the full potential of your router with our user-friendly manual.

Share
Download
background image

DIR-822

 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router

User Manual

Configuring via Web-based Interface

WPS

On the 

Wi-Fi / WPS

 page, you can enable the function for configuration of the WLAN and select a 

method for connection to the WLAN.
The   WPS   function   helps   to   configure   the   protected   wireless   network   automatically.   Devices 
connecting to the wireless network via the WPS function must support the WPS function.

!

The WPS function allows adding devices only to the basic wireless network of the router.

!

Before using the function you need to configure one of the following authentication types: 

Open

 

 

 with no encryption, 

 

 WPA2-PSK

 

 

 or 

   WPA-PSK/WPA2-PSK mixed

 

 

 with the 

 

 AES

 

  

encryption method. When other security settings are specified, controls of the

 

 

 WPS

 

  page

 

  

on the tab of the relevant band are not available.

Figure 105. The page for configuring the WPS function.

You can activate the WPS function via the web-based interface or the hardware 

WPS

 button on the 

cover of the device.
To activate the WPS function via the hardware button, move the  

Enable Wi-Fi when WPS 

function is activated with hardware button

  switch to the right on the tabs of both bands. 

Then, with the device turned on, push the button, hold it for 2 seconds, and release. The 

WPS 

LED 

should start blinking. In addition, upon pressing the button, the wireless interfaces of the device are 
enabled if they were disabled before.
If you want to disable activating the WPS function via the hardware button, on the tabs of both 
bands, move the  

Enable Wi-Fi when WPS function is activated with hardware button 

switch to the left and make sure that the WPS function is not activated via the web-based interface.

Page 

126

 of 235

Summary of Contents for DIR-822












































































































































































































































Reviews:

No comments

Related manuals for DIR-822

NEC Univerge SV8100 System Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 44
JCG Q5 Quick Installation Manual preview
Q5
Brand: JCG Pages: 3
Lancom 7100 VPN Manual preview
7100 VPN
Brand: Lancom Pages: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Brand: Patton electronics Pages: 12
Garland INT40G2SR44 User Manual preview
INT40G2SR44
Brand: Garland Pages: 43
Lutron Electronics Smart Bridge Quick Start Manual preview
Smart Bridge
Brand: Lutron Electronics Pages: 4
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Brand: ETL Pages: 83
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Brand: Cabletron Systems Pages: 42
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Brand: ANEP Pages: 48
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Brand: TP-Link Pages: 16
rtd IDAN-ID5915 User Manual preview
IDAN-ID5915
Brand: rtd Pages: 28
Aztech na8300 Easy Start preview
na8300
Brand: Aztech Pages: 13
Linksys EFG20 User Manual preview
EFG20
Brand: Linksys Pages: 37
Paradyne Application Module 9109 OCU-DP Installation Instructions Manual preview
Application Module 9109 OCU-DP
Brand: Paradyne Pages: 8
FiberHome AN5506-04 Series Product Manual preview
AN5506-04 Series
Brand: FiberHome Pages: 146
Ecos SECURE BOOT STICK FX Administrator'S Manual preview
SECURE BOOT STICK FX
Brand: Ecos Pages: 22
Kraun 1T1R - USB User Manual preview
1T1R - USB
Brand: Kraun Pages: 32
IBM IBM 9077 Get Connected preview
IBM 9077
Brand: IBM Pages: 342

Brands by name

Popular brands

Load more brands