D-Link DIR-822, User Manual

Page: 185 / 235

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Configuring via Web-based Interface
Parameter Description
Name
A name for the virtual server for easier identification. You can
specify any name.
Template
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
Interface A WAN connection to which this virtual server will be assigned.
Protocol
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
NAT Loopback
Move the switch to the right in order to let the users of the router's
LAN access the local server using the external IP address of the
router or its DDNS name (if a DDNS service is configured). Users
from the external network access the router using the same address
(or DDNS name).
Public Network Settings
Remote IP
Enter the IP address of the server from the external network.
To add one more IP address, click the
ADD REMOTE IP button and
enter the address in the displayed line.
To remove the IP address, click the
Delete icon ( ) in the line of
the address.
Public port
A port of the router from which traffic is directed to the IP address
specified in the
Private IP field in the Private Network Settings
section. You can specify one port or several ports separated by a
comma.
Private Network Settings
Private IP
The IP address of the server from the local area network. To choose
a device connected to the router's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
Private port
A port of the IP address specified in the
Private IP
field to which
traffic is directed from the
Public port
. You can specify one port or
several ports separated by a comma.
Click the
APPLY
button.
To set a schedule for a virtual server, click the Set schedule icon ( ) in the line corresponding
to this server. In the opened window, from the
Rule
drop-down list, select the
Create rule
value to
create a new schedule (see the Schedule section, page 204) or select the
Select an existing one
value to use the existing one. Existing schedules are displayed in the
Rule name
drop-down list.
Page 185 of 235