D-Link DIR-822 User Manual Download

Page: 214 / 235

DIR-822

AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router

User Manual

Configuring via Web-based Interface

To specify additional settings, click the

MORE SETTINGS

button.

Figure 157. The

System / Traceroute

page. The additional settings window.

In the opened window, you can specify the following parameters:

Parameter

Description

Maximum TTL value

Specify the TTL (

Time to live

) parameter value. The default value is

Number of attempts

The number of attempts to hit an intermediate host.

Wait time

A period of waiting for an intermediate host response.

To restore the default field values, click the

DEFAULT SETTINGS

button.

After specifying the additional parameters, click the

button.

To run the check, click the

START

button. After a while, the results will be displayed on the page.

If you need to interrupt the check, click the

CANCEL

button (the button is available from the

moment the check starts).
To remove the check result from the page, click the

CLEAR

button.

Page

214

of 235

Summary of Contents for DIR-822












































































































































































































































Search results

Summary of Contents for DIR-822

Reviews:

Related manuals for DIR-822

Brands by name

Popular brands

D-Link DIR-822, User Manual

Search results

Summary of Contents for DIR-822

Reviews:

Related manuals for DIR-822

Brands by name

Popular brands