D-Link DIR-803 User Manual Download Page 77

Page: 77 / 159

D-Link DIR-803 User Manual

Section 3 - Configuration

Enter a

Name

that is meaningful to you for

the inbound filter rule.

You may choose to

Allow

Deny

access.

Check to

Enable

rule.

Enter the starting WAN-side IP address.

Enter the ending WAN-side IP address.

Click the

Add

button to apply your settings.

The rule will appear in the

Inbound Filter Rules

List

below.

This section will list all rules that are created.

You may click the

Edit

icon to change the

settings or enable/disable the rule, or click

the

Trash

icon to permanently delete the rule.

Name:

Action:

Remote IP

Range: Enable:

Remote IP Start:

Remote IP End:

Add:

Inbound Filter

Rules List:

The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can

configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual

Server, Port Forwarding, or Remote Administration features.

Inbound Filters

Summary of Contents for DIR-803
































































































































































Search results

Summary of Contents for DIR-803

Reviews:

Related manuals for DIR-803

Brands by name

Popular brands

D-Link DIR-803, User Manual

Search results

Summary of Contents for DIR-803

Reviews:

Related manuals for DIR-803

Brands by name

Popular brands