23
D-Link DIR-803 User Manual
Section 3 - Configuration
Select
Dynamic IP (DHCP)
to obtain IP Address information
automatically from your ISP. This option is commonly used for
cable modem services.
The
Host Name
is optional but may be required by some ISPs.
Leave blank if you are not sure.
Check the box if you are having problems obtaining an IP address
from your ISP.
Enter the Primary and Secondary
DNS Server
IP addresses
assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Leave blank if you did not specifically
receive these from your ISP.
Maximum Transmission Unit - you may need to change the
MTU
for optimal performance with your specific ISP. 1500 is the default
MTU.
The default
MAC Address
is set to the Internet port’s physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless
required by your ISP. You can use the
Clone Your PC’s MAC
Address
button to replace the Internet port’s MAC address with
the MAC address of your Ethernet card.
My Internet
Connection is:
Host Name:
Use Unicasting:
Primary/Secondary
DNS Servers:
MTU:
MAC Address:
Internet Setup
Dynamic (Cable)
