27
D-Link DIR-803 User Manual
Section 3 - Configuration
Select
L2TP (Username/Password)
from the drop-down menu.
Select
Static IP
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the L2TP
IP Address
supplied by your ISP (Static only).
Enter the
Subnet Mask
supplied by your ISP (Static only).
Enter the
Gateway IP Address
provided by your ISP.
Enter the
Server IP Address
provided by your ISP (optional).
Enter your L2TP
Username
.
Enter your L2TP
Password
and then retype the password in the
next box.
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a
Maximum Idle Time
during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the Primary and Secondary
DNS Server
Addresses (Static
L2TP only).
My Internet
Connection is:
Address Mode:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
Username:
Password:
Reconnect Mode:
Maximum Idle
Time:
DNS Servers:
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password.