D-Link DIR-628 - RangeBooster N Dual Band Router... Product Manual Download

Page: 67 / 112

D-Link DIR-68 User Manual

Section - Configuration

Click on

Check.Online.Now.for.Latest.Firmware.

Version

to find out if there is an updated firmware;

if so, download the new firmware to your hard
drive.

After you have downloaded the new firmware,
click

Browse

to locate the firmware update on

your hard drive. Click

Upload

to complete the

firmware upgrade.

Check

Automatically.Check.Online.for.Latest.

Firmware.Version

to have the router check

automatically to see if there is a new firmware
upgrade.

Check

Email.Notification.of.Newer.Firmware.

Version

to have the router send an email when

there is a new firmware available.

Firmware

Upgrade:

Browse:

Notifications

Options:

Update Firmware

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on

Browse

to locate the firmware file to be used for the update. Please check the D-Link support

site for firmware updates at http://support.dlink.ca. You can download firmware upgrades to your hard drive from the
D-Link support site.

Summary of Contents for DIR-628 - RangeBooster N Dual Band Router...

















































































































Search results

Summary of Contents for DIR-628 - RangeBooster N Dual Band Router...

Reviews:

Related manuals for DIR-628 - RangeBooster N Dual Band Router...

Brands by name

Popular brands

D-Link DIR-628 - RangeBooster N Dual Band Router..., Product Manual

Search results

Summary of Contents for DIR-628 - RangeBooster N Dual Band Router...

Reviews:

Related manuals for DIR-628 - RangeBooster N Dual Band Router...

Brands by name

Popular brands