6
D-Link DIR-68 User Manual
Section - Configuration
This Wizard helps you add wireless devices to the wireless
network.
The wizard will either display the wireless network settings
to guide you through manual configuration, prompt you to
enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected
Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and
then the on the router within 60 seconds. The status LED on the router will flash three times if the device has been successfully
added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A
registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup
button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
Start the wizard.
Add Wireless
Station:
Add Wireless
Device Wizard:
