D-Link DIR-68 User Manual
Section - Configuration
The
Auto.Channel.Scan
setting can be selected to allow the DIR-628 to choose the channel with the least amount of
interference.
Indicates the channel setting for the DIR-628. By default the channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize the wireless network. If you enable
Auto.Channel.Scan
,
this option will be greyed out.
Select the transmit rate. It is strongly suggested to select
Best.(Auto)
for best performance.
Select the Channel Width:
Auto.20/40
- Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz
- Select if you are not using any 802.11n wireless clients. This is the default setting.
Select
Invisible
if you do not want the SSID of your wireless network to be broadcasted by the DIR-628. If Invisible is
selected, the SSID of the DIR-628 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DIR-628 in order to connect to it.
Refer to page 74 for more information regarding wireless security.
Visibility Status:
Wireless Security:
Transmission Rate:
Channel Width:
Enable Auto
Channel Scan:
Wireless Channel:
