D-Link DIR-68 User Manual
Section - Configuration
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point
to synchronize a wireless network. Specify
a value. 100 is the default setting and is
recommended.
This value should remain at its default setting
of 2432. If inconsistent data flow is a problem,
only a minor modification should be made.
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
(Delivery Traffic Indication Message) 3 is
the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast
messages.
Enabling WLAN Partition prevents associated wireles clients from communicating with each other.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may
create higher data loss.
Transmit Power:
Beacon Period:
RTS Threshold:
Fragmentation
Threshold:
DTIM Interval:
WLAN Partition:
WMM Function:
Short GI:
Advanced Wireless Settings
