D-Link DIR-501 User Manual Download

Page: 18 / 98

D-Link DIR-615 User Manual

Section 3 - Configuration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The default MAC Address is set to the WAN’s physical

interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address

unless required by your ISP.

The default MAC address is set to the WAN’s physical

interface MAC address on the Broadband Router. You

can use the

Clone MAC Address

button to copy the MAC

address of the Ethernet Card installed by your ISP and

replace the WAN MAC address with the MAC address of the

router. It is not recommended that you change the default

MAC address unless required by your ISP.

Enter the Primary DNS server IP address assigned by your

ISP.

This is optional.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP.

1492

is the default MTU.

IP Address:

Subnet Mask:

ISP Gateway:

MAC Address:

Clone MAC

Address:

Primary DNS

Address:

Secondary DNS

Address:

MTU:

Internet Setup

Static (assigned by ISP)

Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,

gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP

form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

Summary of Contents for DIR-501



































































































Search results

Summary of Contents for DIR-501

Reviews:

Related manuals for DIR-501

Brands by name

Popular brands

D-Link DIR-501, User Manual

Search results

Summary of Contents for DIR-501

Reviews:

Related manuals for DIR-501

Brands by name

Popular brands