D-Link DIR-501 User Manual Download

Page: 45 / 98

D-Link DIR-615 User Manual

Section 3 - Configuration

System Check

VCT is an advanced feature that integrates a

LAN cable tester on every Ethernet port on the

router. Through the graphical user interface

(GUI), VCT can be used to remotely diagnose

and report cable faults such as opens, shorts,

swaps, and impedance mismatch. This feature

significantly reduces service calls and returns by

allowing users to easily troubleshoot their cable

connections.

The Ping Test is used to send Ping packets to

test if a computer is on the Internet. Enter the IP

Address that you wish to Ping, and click

Ping

Virtual Cable

Tester (VCT)

Info:

Ping Test:

This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be

used to test the status of the Internet.

Summary of Contents for DIR-501



































































































Search results

Summary of Contents for DIR-501

Reviews:

Related manuals for DIR-501

Brands by name

Popular brands

D-Link DIR-501, User Manual

Search results

Summary of Contents for DIR-501

Reviews:

Related manuals for DIR-501

Brands by name

Popular brands