24
Port" field, select the protocol type as TCP or UDP, then enter the public
ports associated with the trigger port to open them for inbound traffic.
The DI-604UP provides some predefined applications in the table on the
bottom of the web page. Select the application you want to use and
enable it.
Note!
Only one PC can use each Special Application tunnel.
Trigger Name
This is the name referencing the special application.
Trigger Port
This is the port used to trigger the application. It can be
either a single port or a range of ports.
Trigger Type
This is the protocol used to trigger the special application.
Public Port
This is the port number on the WAN side that will be used to
access the application. You may define a single port or a range of
ports. You can use a comma to add multiple ports or a hyphen to
add port ranges.
Public Type
This is the protocol used for the special application.
