D-Link DI-524 - AirPlus G Wireless Router Manual Download

Page: 3 / 92

Internet Explorer Version 6.0 or Netscape Navigator Version 7.0

and Above

Contents of Package:

D-Link DI-524 Wireless 150 Router

Switching 5V/1.2A Full-Range US Type
Manual and Warranty on CD
Quick Installation Guide
Ethernet Cable (All the DI-524’s Ethernet ports are Auto-MDIX)

Computers with Windows, Macintosh, or Linux-based

operating systems with an installed Ethernet adapter

Package Contents

Note: Using a power supply with a different voltage rating than the one included with

the DI-524 will cause damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

System Requirements for Configuration:








Ethernet-Based Cable or DSL Modem



Summary of Contents for DI-524 - AirPlus G Wireless Router





























































































Search results

Summary of Contents for DI-524 - AirPlus G Wireless Router

Reviews:

Related manuals for DI-524 - AirPlus G Wireless Router

Brands by name

Popular brands

D-Link DI-524 - AirPlus G Wireless Router, Manual

Search results

Summary of Contents for DI-524 - AirPlus G Wireless Router

Reviews:

Related manuals for DI-524 - AirPlus G Wireless Router

Brands by name

Popular brands