manualshive.com logo in svg

D-Link DGS-3324SR, User Manual

The D-Link DGS-3324SR is a powerful networking switch with advanced functionalities. Its robust specifications include 24 ports for seamless connectivity. To make the most of this product, users can easily download the free user manual from our website, manualshive.com, providing in-depth guidance for optimal usage.

Share
Download
background image

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

 

58 

     

discarding, there is no functional difference, the port is not active in the network topology. Table 6-1 below compares how 
the three protocols differ regarding the port state transition. 

All three protocols calculate a stable topology in the same way. Every segment will have a single path to the root bridge. 
All bridges listen for BPDU packets. However, BPDU packets are sent more frequently - with every Hello packet. BPDU 
packets are sent even if a BPDU packet was not received. Therefore, each link between bridges is sensitive to the status of 
the link. Ultimately this difference results in faster detection of failed links, and thus faster topology adjustment. A draw-
back of 802.1d is this absence of immediate feedback from adjacent bridges. 

802.1d MSTP 

802.1w RSTP 

802.1d STP 

Forwarding 

Learning 

Discarding Discarding Disabled  No 

No 

Discarding Discarding Blocking  No 

No 

Discarding Discarding Listening  No 

No 

Learning Learning Learning No 

Yes 

Forwarding Forwarding Forwarding Yes 

Yes 

Table 6- 1. Comparing Port States 

RSTP is capable of a more rapid transition to a forwarding state - it no longer relies on timer configurations - RSTP 
compliant bridges are sensitive to feedback from other RSTP compliant bridge links. Ports do not need to wait for the 
topology to stabilize before transitioning to a forwarding state. In order to allow this rapid transition, the protocol 
introduces two new variables: the edge port and the point-to-point (P2P) port. 

Edge Port 

The edge port is a configurable designation used for a port that is directly connected to a segment where a loop cannot be 
created. An example would be a port connected directly to a single workstation. Ports that are designated as edge ports 
transition to a forwarding state immediately without going through the listening and learning states. An edge port loses its 
status if it receives a BPDU packet, immediately becoming a normal spanning tree port. 

P2P Port 

A P2P port is also capable of rapid transition. P2P ports may be used to connect to other bridges. Under RSTP/MSTP, all 
ports operating in full-duplex mode are considered to be P2P ports, unless manually overridden through configuration. 

802.1d / 802.1w / 802.1s Compatibility 

MSTP or RSTP can interoperate with legacy equipment and is capable of automatically adjusting BPDU packets to 802.1d 
format when necessary. However, any segment using 802.1d STP will not benefit from the rapid transition and rapid 
topology change detection of MSTP or RSTP. The protocol also provides for a variable used for migration in the event that 
legacy equipment on a segment is updated to use RSTP or MSTP. 

The Spanning Tree Protocol (STP) operates on two levels:  

1.  On the switch level, the settings are globally implemented. 

2.  On the port level, the settings are implemented on a per user-defined group of ports basis. 

Summary of Contents for DGS-3324SR









































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3324SR

Paradyne Adapter Bracket Notice preview
Adapter Bracket
Brand: Paradyne Pages: 1
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Brand: Freund Pages: 6
QNAP Turbo NAS TVS-71 Series Hardware User Manual preview
Turbo NAS TVS-71 Series
Brand: QNAP Pages: 51
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Brand: ACTi Pages: 12
IMC Networks iMcV-FiberLinX Operation Manual preview
iMcV-FiberLinX
Brand: IMC Networks Pages: 36
Xantech RT1610 Installation Instructions Manual preview
RT1610
Brand: Xantech Pages: 6
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108
Hanwha Techwin Wisenet PRN-6400DB4 User Manual preview
Wisenet PRN-6400DB4
Brand: Hanwha Techwin Pages: 125
NetComm RTA100 User Manual preview
RTA100
Brand: NetComm Pages: 75
Proscend 6200-2W User Manual preview
6200-2W
Brand: Proscend Pages: 93
Netequalizer NE3000-10 Quick Start Manual preview
NE3000-10
Brand: Netequalizer Pages: 14
Stephen SON8010U User Manual preview
SON8010U
Brand: Stephen Pages: 8
Axtrinet APG200 User Manual preview
APG200
Brand: Axtrinet Pages: 49
Allied Telesis 613-50550-00 Installation Manual preview
613-50550-00
Brand: Allied Telesis Pages: 2
Niveo Professional NR-10 User Manual preview
NR-10
Brand: Niveo Professional Pages: 49
Cambium Networks PTP 670 Series Installation Manual preview
PTP 670 Series
Brand: Cambium Networks Pages: 24

Brands by name

Popular brands

Load more brands