manualshive.com logo in svg

D-Link DGS-3324SR, User Manual, Page: 164 / 392

Share
Download
D-Link DGS-3324SR User Manual Download Page 164

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

 

149 

     

 

Figure 6- 114. IP Interface Settings – Edit window 

Enter a name for the new interface to be added in the 

Interface Name

 field (if editing an IP interface, the 

Interface Name

 

will already be in the top field as seen in the window above). Enter the interface’s IP address and subnet mask in the 
corresponding fields. Pull the 

State 

pull-down menu to 

Enabled

 

and

 

click 

Apply

 to enter to make the IP interface effective. 

To view entries in the 

IP Interface Table

, click the 

Show All IP Interface Entries

 hyperlink. Use the 

Save Changes 

dialog 

box from the 

Maintenance

 folder to enter the changes into NV-RAM. 

The following fields can be set: 

Parameter 

            Description 

Interface Name 

This field displays the name for the IP interface. The default IP interface is named 
“System”. 

IP Address 

This field allows the entry of an IP address to be assigned to this IP interface. 

Subnet Mask 

This field allows the entry of a subnet mask to be applied to this IP interface. 

VLAN Name 

This field allows the entry of the VLAN Name for the VLAN the IP interface belongs to.

Secondary  

Use the pull-down menu to set the IP interface as 

True

 or 

False

. 

True

 will set the 

interface as secondary and 

False

 will denote the interface as the primary interface of 

the VLAN entered above.

 Secondary

 interfaces can only be configured if a 

primary 

interface is first configured. 

State  

This field may be altered between 

Enabled 

and 

Disabled

 using the pull-down menu. 

This entry determines whether the interface will be active or not. 

Link Status  

This read-only  field states the current status of the IP Interface on the Switch. 

Link Up 

denotes that the IP interface is up and running on the Switch. 

Link Down

 will denote 

that the IP interface is not currently set and/or enabled on the Switch. 

Click 

Apply

 to implement changes made. 

Summary of Contents for DGS-3324SR









































































































































































































































































































































































































Reviews:

No comments