manualshive.com logo in svg

D-Link DGS-3324SR, User Manual

The D-Link DGS-3324SR is a powerful networking switch with advanced functionalities. Its robust specifications include 24 ports for seamless connectivity. To make the most of this product, users can easily download the free user manual from our website, manualshive.com, providing in-depth guidance for optimal usage.

Share
Download
background image

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

 

24 

     

2.  Connect the other end of the cable to a terminal or to the serial connector of a computer running terminal 

emulation software. Set the terminal emulation software as follows: 

3.  Select the appropriate serial port (COM port 1 or COM port 2). 
4.  Set the data rate to 115200 baud. 
5.  Set the data format to 8 data bits, 1 stop bit, and no parity. 
6.  Set flow control to none. 
7.  Under Properties, select VT100 for Emulation mode. 
8.  Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the Terminal keys are selected (not 

Windows keys). 

9.  After you have correctly set up the terminal, plug the power cable into the power receptacle on the back of the 

Switch. The boot sequence appears in the terminal. 

10.  After the boot sequence completes, the console login screen displays. 
11.  If the user has not logged into the command line interface (CLI) program, press the Enter key at the User name 

and password prompts. There is no default user name and password for the Switch. The administrator must first 
create user names and passwords. If user accounts have been previously set up, log in and continue to configure 
the Switch. 

12.  Enter the commands to complete desired tasks. Many commands require administrator-level access privileges. 

Read the next section for more information on setting up user accounts. See the

 

xStack DGS/DXS-3300 Series 

CLI Manual

 

on the documentation CD for a list of all commands and additional information on using the CLI. 

13.  When the commands have been completed, exit the session with the logout command or close the emulator 

program. 

Make sure the terminal or PC used to make this connection is configured to match these settings. 

If problems occur in making this connection on a PC, make sure the emulation is set to VT-100. The emulation settings can 
be configured by clicking on the 

File

 menu in the HyperTerminal window by clicking on 

Properties

 in the drop-down 

menu, and then clicking the 

Settings

 tab. This is where you will find the 

Emulation

 options. If you still do not see 

anything, try rebooting the Switch by disconnecting its power supply. 

Once connected to the console, the screen below will appear on the console screen. This is where the user will enter 
commands to perform all the available management functions. The Switch will prompt the user to enter a user name and a 
password. Upon the initial connection, there is no user name or password and therefore just press enter twice to access the 
command line interface.  

 

Figure 4- 1. Initial screen after first connection. 

 

NOTE:

 When using HyperTerminal with the Microsoft® Windows® 2000 operating system, 

ensure that Windows 2000 Service Pack 2 or later is installed. Windows 2000 Service Pack 2 
allows arrow keys to be used in HyperTerminal's VT100 emulation. See www.microsoft.com 
for information on Windows 2000 service packs. 

Summary of Contents for DGS-3324SR









































































































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3324SR

NEC Univerge SV8100 System Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 44
Kasda LinkSmart KW6515 User Manual preview
LinkSmart KW6515
Brand: Kasda Pages: 31
ADC HiGain H2TU-R-402 List 7A Quick Installation preview
HiGain H2TU-R-402 List 7A
Brand: ADC Pages: 7
Renesas H8S/2633 User Manual preview
H8S/2633
Brand: Renesas Pages: 28
CELOT CTR-180 User Manual preview
CTR-180
Brand: CELOT Pages: 34
F.F. Group RO 1600 PLU Original Instructions Manual preview
RO 1600 PLU
Brand: F.F. Group Pages: 56
Icy Box IB-NAS5520 Quick Start Manual preview
IB-NAS5520
Brand: Icy Box Pages: 2
LevelOne WAB-3000 How To Set Up preview
WAB-3000
Brand: LevelOne Pages: 11
ZyXEL Communications SHD1110 Quick Start Manual preview
SHD1110
Brand: ZyXEL Communications Pages: 12
Buffalo AirStation G54 WLA2-G54 Quick Setup Manual preview
AirStation G54 WLA2-G54
Brand: Buffalo Pages: 8
Rackable Systems OmniStor 4900F Series User Manual preview
OmniStor 4900F Series
Brand: Rackable Systems Pages: 196
Hama 49276 Operating Instruction preview
49276
Brand: Hama Pages: 7
Sharedband Power Router 2 Configuration Manual preview
Power Router 2
Brand: Sharedband Pages: 3
Gigamon GigaVUE H TA100-CXP Hardware Installation Manual preview
GigaVUE H TA100-CXP
Brand: Gigamon Pages: 115
Alcatel-Lucent Broadband 700 MHz Brochure preview
Broadband 700 MHz
Brand: Alcatel-Lucent Pages: 8
Patton electronics OnSite 9100 Quick Start Manual preview
OnSite 9100
Brand: Patton electronics Pages: 8
Axis T8120 Installation Manual preview
T8120
Brand: Axis Pages: 10
Tripp Lite N306-46M Specification Sheet preview
N306-46M
Brand: Tripp Lite Pages: 2

Brands by name

Popular brands

Load more brands