xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
142
Initializing Ports for Port Based 802.1x
Existing 802.1x port and MAC settings are displayed and can be configured using the window below.
Click
Port Access Entity > PAE System Control > Initialize Port(s)
to open the following window:
Figure 6- 106. Initialize Port window
This window allows initialization of a port or group of ports. The
Initialize Port Table
in the bottom half of the window
displays the current status of the port(s).
This window displays the following information:
Parameter Description
Unit
Choose the Switch ID number of the Switch in the switch stack to be modified.
From and To
Select ports to be initialized.
Port
A read-only field indicating a port on the Switch.
MAC Address
The MAC address of the Switch connected to the corresponding port, if any.
Auth PAE State
The Authenticator PAE State will display one of the following:
Initialize, Discon-
nected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth,
ForceUnauth,
and
N/A.
Backend State
The Backend Authentication State will display one of the following:
Request,
Response, Success, Fail, Timeout, Idle, Initialize,
and
N/A.
Port Status
The status of the controlled port can be
Authorized, Unauthorized,
or
N/A.
Summary of Contents for DGS-3324SR
Page 54: ...xStack DGS DXS 3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual 39 ...
Page 373: ...358 ...
Page 390: ...375 ...