manualshive.com logo in svg

D-Link DGS-3308 Series, User Manual

The D-Link DGS-3308 Series is a versatile network switch designed to streamline network connectivity. To maximize its functionality, it is important to refer to the comprehensive User Manual. You can easily download it for free from our website, ensuring a seamless setup and optimal performance.

Share
Download
background image

8-port Gigabit Ethernet Switch User’s Guide  

227

 

I

NDEX

 

A 

AC inputs ................................................................................216 
AC power cord............................................................................7 
Add a Static Router Port ...............................................172, 175 
Add IP Interface .....................................................................164 
Address Table ........................................................................202 
Aging Time, definition of........................................................18 
Aging Time, range of...............................................................18 
Applications............................................................................206 
Automatic learning...................................................................18 

B 

Baud Rate ..................................................................................73 
BOOTP protocol.......................................................................69 
BOOTP server...........................................................................69 
BOOTP/DHCP Relay..............................................................189 
Broadcast/Multicast Storm Mode .......................................162 
Browse MAC Address Table ...............................................202 
Browse the Router Port .........................................................207 

C 

Changing your Password ........................................................64 

Coll.

..........................................................................................200 

Community Name .....................................................................16 
Configuration Files.................................................................211 
Configure IP Address ..............................................................69 
Connecting to the Switch 

VT100-compatible terminal..................................................57 

console ...........................................................................11, 55, 57 
console port ..........................................................................4, 10 
Console port (RS-232 DCE).....................................................14 
Console port settin gs ..............................................................14 

Cost

..........................................................................................183 

CRC Error

.......................................................................199, 200 

Create/Modify User Accounts ...............................................64 

D 

Default Gateway ...............................................................70, 151 
Diagnostic port ...........................................................................4 
Dimensions..............................................................................216 

Drop Pkts

................................................................................200 

DVMRP Routing Table..........................................................209 
Dynamic filtering ......................................................................18 

E 

Egress.......................................................................................166 
Egress port ................................................................................24 
Ethernet protocol........................................................................6 

Ex. Coll.

...................................................................................200 

ExDefer

....................................................................................200 

F 

Filtering..............................................................................18, 187 
Flash memory ..............................................................................5 

Forward Delay...........................................................33, 180, 182 
Forwarding ........................................................................18, 184 

Fragments

..............................................................................199 

Front Panel ................................................................................10 

G 

gateway router..........................................................................16 
Gigabit Ethernet..........................................................................6 

H 

Hello Interval

.........................................................................175 

Hello Time..........................................................33, 114, 180, 182 
Humidity ..................................................................................216 

I 

IEEE 802.1Q VLANs .................................................................24 
IGMP Group Table .................................................................209 
IGMP Snooping......................................................................208 
Illustration of STP ....................................................................33 
Ingress filtering.........................................................................27 
Ingress port ...............................................................................24 
IP Address.................................................................................15 
IP Addresses and SNMP Community Names ......................15 
IP Configuration .....................................................................158 
IP Setup......................................................................................69 

J 

Jabbers

....................................................................................199 

Join/Prune Interval

...............................................................175 

L 

LAN card ...................................................................................12 

Late Coll.

................................................................................200 

Layer 2 Switch Settings .........................................................162 
Layer 3 IP Routing Protocol Settings..................................162 
LED Indicators ..........................................................................11 
log in...........................................................................................64 

M 

MAC Address Aging Time ..................................................203 
MAC address filtering.............................................................19 
MAC Address Learning........................................................216 
Main Menu................................................................................59 
Management ...............................................................................5 
Management Information Base (MIB) ..................................17 
Management Station IP Settings .........................................193 
Max. Age ...........................................................................33, 114 

Metric

......................................................................................186 

MIBs ...........................................................................................17 
Mirroring..................................................................................177 
Multicasting ............................................................................169 

N 

Network Classes 

Class A, B, C for Subnet Mask...........................................70 

Summary of Contents for DGS-3308 Series



















































































































































































































































Reviews:

No comments

Related manuals for DGS-3308 Series

Harman Kardon ABH 4000 Owner'S Manual preview
ABH 4000
Brand: Harman Kardon Pages: 2
IBM 8271 Nways Ethernet LAN Switch User Manual preview
8271 Nways Ethernet LAN Switch
Brand: IBM Pages: 210
Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES How To Connect preview
LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES
Brand: Jabra Pages: 4
Yamamoto Electric Works Co., Ltd. MS65F Instruction Manual preview
MS65F
Brand: Yamamoto Electric Works Co., Ltd. Pages: 15
Contemporary Controls EISK5-100T/H Installation Manual preview
EISK5-100T/H
Brand: Contemporary Controls Pages: 4
LONG-JOIN JL-403C Manual preview
JL-403C
Brand: LONG-JOIN Pages: 2
IOGear GCS62DP Quick Start Manual preview
GCS62DP
Brand: IOGear Pages: 10
socomec 95333400 Instruction Manual preview
95333400
Brand: socomec Pages: 43
West Mountain Radio PWRguard PLUS Operating Manual preview
PWRguard PLUS
Brand: West Mountain Radio Pages: 10
AdLuminis 324002 Quick Start Manual preview
324002
Brand: AdLuminis Pages: 8
Vivotek AW-FGT-100C-120 Quick Installation Manual preview
AW-FGT-100C-120
Brand: Vivotek Pages: 2
EtherWAN EX62000 Installation Manual preview
EX62000
Brand: EtherWAN Pages: 2
Inscape Data Link Power LPS2400-T1 User Manual preview
Link Power LPS2400-T1
Brand: Inscape Data Pages: 8
ATEN Master View CS-74A User Manual preview
Master View CS-74A
Brand: ATEN Pages: 16
TekTone Tek-CARE NC554/8 Installation Instructions preview
Tek-CARE NC554/8
Brand: TekTone Pages: 2
Cabletron Systems 42T User Manual preview
42T
Brand: Cabletron Systems Pages: 105
Intellinet 560641 Instructions Manual preview
560641
Brand: Intellinet Pages: 12
Campbell HUB-SDM8 Instruction Manual preview
HUB-SDM8
Brand: Campbell Pages: 10

Brands by name

Popular brands

Load more brands