manualshive.com logo in svg

D-Link DGS-3308 Series, User Manual

The D-Link DGS-3308 Series is a versatile network switch designed to streamline network connectivity. To maximize its functionality, it is important to refer to the comprehensive User Manual. You can easily download it for free from our website, ensuring a seamless setup and optimal performance.

Share
Download
background image

8-port Gigabit Ethernet Switch User’s Guide  

228 

NV-RAM............................................................................62, 149 

O 

Operating Temperature..........................................................216 
Out-of-Band/Console Setting menu......................................72 

Oversize

...................................................................................199 

P 

password ...................................................................................58 
Port Configuration..................................................................160 
Port Error Packets ...................................................................198 
Port GMRP Settings...............................................................168 
Port Ingress Filter...................................................................167 
Port Priority ...............................................................................33 
Port Trunking..........................................................................183 
Port Utilization Statistics .......................................................198 
Port VLAN ID (PVID).............................................................167 
Power..........................................................................................11 
Power Consumption...............................................................216 
Priority................................................33, 114, 116, 181, 182, 183 

R 

RAM...................................................................................61, 149 
RAM Buffer.............................................................................216 
Rear Panel..................................................................................10 
RJ-45 Pin Specification ..........................................................217 
RS-232 ..........................................................................................4 

S 

Save Log to TFTP Server......................................................212 
Saving Changes................................................................61, 149 
security ................................................................................16, 24 
Serial Port Settings.................................................................197 
Setting an IP Address............................................................150 
Setting the Administrator Password ...................................151 
Setting Trap Destinations .....................................................151 
Setting Up The Switch.............................................................66 
Setting Up Web Management..............................................150 
Setup IP Interface...................................................................163 
Setup RIP.................................................................................162 

Single Coll

..............................................................................200 

Spanning Tree Algorithm..........................................................5 
Spanning Tree Algorithm (STA)............................................29 
Spanning Tree Protocol...........................................................19 
Spanning Tree Protocol Configuration...............................178 
Static / Default Routes...........................................................185 

Static ARP ...............................................................................186 
Statis tics ..................................................................................198 
Storage Temperature..............................................................216 
Store and forward switching.....................................................4 
STP Port Settings ...................................................................183 
Subnet Mask.............................................................................70 
Switch History ........................................................................209 
Switch Operation Mode ........................................................161 
System Information................................................................158 

T 

Tag

............................................................................................166 

tagging .................................................................................23, 24 
Target Port Selection .............................................................177 
Telnet .........................................................................................55 

Telnet Settings

......................................................................197 

terminal emulator......................................................................57 
terminal parameters ..................................................................57 
Third-party vendors’ SNMP software ..................................17 
Transmission Methods .........................................................216 
Trap managers ..........................................................................16 
Trap Receivers ........................................................................194 
Trap Type 

Authentication Failure .........................................................17 
Cold Start ...............................................................................16 
Link Change Event ...............................................................17 
New Root ...............................................................................17 
Topology Change.................................................................17 
Warm Start .............................................................................17 

Traps ..........................................................................................16 

U 

Undersize

................................................................................199 

Unpacking ...................................................................................7 
untagging ............................................................................23, 24 
Upload Configuration File to TFTP Server.........................212 
username....................................................................................58 

V 

View/Delete User Accounts ...................................................65 
VLAN...........................................................................19, 23, 165 
VT100-compatible terminal......................................................57 

W 

Web-based management module.........................................145 
Weight .....................................................................................216 

Summary of Contents for DGS-3308 Series



















































































































































































































































Reviews:

No comments

Related manuals for DGS-3308 Series

Dataprobe iBoot PoE-P General Description Manual preview
iBoot PoE-P
Brand: Dataprobe Pages: 31
IBM ThinkPad 600 Product Overview preview
ThinkPad 600
Brand: IBM Pages: 13
IBM Flex System EN2092 Quick Start Manual preview
Flex System EN2092
Brand: IBM Pages: 2
Raritan PARAGON II Series Quick Manual preview
PARAGON II Series
Brand: Raritan Pages: 1
Raritan Paragon Manager Installation And Operation Manual preview
Paragon Manager
Brand: Raritan Pages: 117
D-Link DES-3326SRM Product Manual preview
DES-3326SRM
Brand: D-Link Pages: 242
H3C S5170-EI Series Manual preview
S5170-EI Series
Brand: H3C Pages: 46
WAGO ETHERNET Accessories 852 852-0111 Mounting, Installation And Handling Manual preview
ETHERNET Accessories 852 852-0111
Brand: WAGO Pages: 38
hager TS 204 User Instruction preview
TS 204
Brand: hager Pages: 2
GBC 34.0109.41 Quick Start Manual preview
34.0109.41
Brand: GBC Pages: 2
Barco MatrixPRO 8x8 DVI Quick Start Manual preview
MatrixPRO 8x8 DVI
Brand: Barco Pages: 2
Vega VEGAWAVE S 61 Operating Instructions Manual preview
VEGAWAVE S 61
Brand: Vega Pages: 44
Microsonic zws-7/CD/QS Operating Instructions preview
zws-7/CD/QS
Brand: Microsonic Pages: 2
Guntermann & Drunck UserCenter 2 Operating Instructions Manual preview
UserCenter 2
Brand: Guntermann & Drunck Pages: 20
Kramer VS-211X Quick Start Manual preview
VS-211X
Brand: Kramer Pages: 2
DELTA DORE TYXIA 4600 Manual preview
TYXIA 4600
Brand: DELTA DORE Pages: 3
Hored AI1010G-Apollo User Manual preview
AI1010G-Apollo
Brand: Hored Pages: 4
Tekvox TEK 1201-N+ User Manual preview
TEK 1201-N+
Brand: Tekvox Pages: 40

Brands by name

Popular brands

Load more brands