manualshive.com logo in svg

D-Link DGS-3224TGR - Switch, Command Line Interface Reference Manual

The D-Link DGS-3224TGR Switch is a high-performance networking solution that ensures seamless connectivity. With its advanced features and reliability, this switch streamlines network operations. Unlock the full potential of this product by accessing the free User Manual, available for download from manualshive.com. Discover the product's capabilities and enhance your networking experience.

Share
Download
background image

DGS-3224TGR Layer 2 Gigabit Ethernet Switch User’s Guide 

144

 Success. 
 
DGS-3224TGR:4#

 

 

config link_aggregation 

Purpose 

Used to configure a previously created link 
aggregation group. 

Syntax 

config link_aggregation group_id <value> 

{master_port <port>|ports <portlist>| 

state [enable|disable] 

Description 

This command allows you to configure a 
link aggregation group that was created 
with the create link_aggregation

 

command 

above. 

Parameters 

<value> 

−

 Specifies the group id. The 

switch allows up to 32 link aggregation 
groups to be configured. The group number 
identifies each of the groups. 

<port> 

−

 Master port ID. Specifies which 

port (by port number) of the link 
aggregation group will be the master port.  
All of the ports in a link aggregation group 
will share the port configuration with the 
master port. 

<portlist> 

−

 Specifies a range of ports that 

will belong to the link aggregation group. 
The beginning and end of the port list 
range are separated by a dash. For 
example, 3 would specify port 3. 4 specifies 
port 4. 1-4 specifies all of the ports between 

Summary of Contents for DGS-3224TGR - Switch













































































































































































































































Reviews:

No comments

Related manuals for DGS-3224TGR - Switch

Abus TVVR36500 User Manual preview
TVVR36500
Brand: Abus Pages: 60
National Instruments Module NI PXI-8250 User Manual preview
Module NI PXI-8250
Brand: National Instruments Pages: 39
Banner Sure Cross DX70 Instruction Manual preview
Sure Cross DX70
Brand: Banner Pages: 35
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Abocom WM3111 Specification preview
WM3111
Brand: Abocom Pages: 1
Mastervolt MasterBus Tanklevel Interface User And Installation Manual preview
MasterBus Tanklevel Interface
Brand: Mastervolt Pages: 8
D3 DesignCore RVP-TDA3 Series Quick Start Manual preview
DesignCore RVP-TDA3 Series
Brand: D3 Pages: 34
AC&NC JetStor NAS 724UX User Manual preview
JetStor NAS 724UX
Brand: AC&NC Pages: 117
ANTAIRA LMP-1202M-SFP Series Quick Installation Manual preview
LMP-1202M-SFP Series
Brand: ANTAIRA Pages: 2
Hunter Pro-C Series Programming Instructions preview
Pro-C Series
Brand: Hunter Pages: 2
Comtrend Corporation WAP-5922MP Quick Install Manual preview
WAP-5922MP
Brand: Comtrend Corporation Pages: 4
Linksys PLK300 Quick Installation Manual preview
PLK300
Brand: Linksys Pages: 6
MaxComm M-150 Manual preview
M-150
Brand: MaxComm Pages: 10
Idis DR-8364F Quick Manual preview
DR-8364F
Brand: Idis Pages: 16
ADTRAN Total Access 1500 Dual FXS/DPO Quick Start Manual preview
Total Access 1500 Dual FXS/DPO
Brand: ADTRAN Pages: 2
Nexxt Amp300 Quick Installation Manual preview
Amp300
Brand: Nexxt Pages: 2
Proxim TeraBridge 5845 Specifications preview
TeraBridge 5845
Brand: Proxim Pages: 4
Aerotech QNP3 Series Hardware Manual preview
QNP3 Series
Brand: Aerotech Pages: 62

Brands by name

Popular brands

Load more brands