manualshive.com logo in svg

D-Link DGS-3224TGR - Switch, Command Line Interface Reference Manual

The D-Link DGS-3224TGR Switch is a high-performance networking solution that ensures seamless connectivity. With its advanced features and reliability, this switch streamlines network operations. Unlock the full potential of this product by accessing the free User Manual, available for download from manualshive.com. Discover the product's capabilities and enhance your networking experience.

Share
Download
background image

DGS-3224TGR Layer 2 Gigabit Ethernet Switch User’s Guide 

210

config access_profile 

field in each packet and if this field 
contains the value entered here, apply 
the following rules. 
user_define <hex 0x0-0xfffffff> 

−

 

Specifies a mask to be combined with 
the value found in the frame header 
using a logical AND operaiton. 

priority <value 0-7> 

−

 Specifies that the 

access profile will apply to packets that 
contain this value in their 802.1p priority 
field of their header. 
replace_priority 

−

 This parameter is 

specified if you want to change the 802.1p 
user priority of a packet that meets the 
specified criteria. Otherwise, a packet will 
have its incoming 802.1p user priority re-
written to its original value before being 
transmitted from the switch. 
replace_dscp <value 0-63> 

−

 Allows you to 

specify a value to be written to the DSCP 
field of an incoming packet that meets the 
criteria specified in the first part of the 
command. This value will over-write the 
value in the DSCP field of the packet. 
delete <value 1-255> 

−

 Specifies that the 

access ID  of a rule you want to delete. 

Restrictions 

Only administrator-level users can issue 
this command. 

 
 

Example Usage: 

Summary of Contents for DGS-3224TGR - Switch













































































































































































































































Reviews:

No comments

Related manuals for DGS-3224TGR - Switch

IBM E12 Quick Reference Manual preview
E12
Brand: IBM Pages: 4
Dahua DHI-NVR5224-24P-4KS2 Quick Start Manual preview
DHI-NVR5224-24P-4KS2
Brand: Dahua Pages: 24
ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Brand: ICP DAS USA Pages: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Brand: ICP DAS USA Pages: 24
ICP DAS USA MSM-508 Quick Start preview
MSM-508
Brand: ICP DAS USA Pages: 4
N-Tron 7018 User Manual & Installation Manual preview
7018
Brand: N-Tron Pages: 138
Multitech MultiConnect SE MTS2EA Quick Start Manual preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 8
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Brand: Paradyne Pages: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Brand: Draytek Pages: 54
TwinMOS Octopus G Series User Manual preview
Octopus G Series
Brand: TwinMOS Pages: 29
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Brand: Paradyne Pages: 6
Lanner FW-7551 User Manual preview
FW-7551
Brand: Lanner Pages: 38
Allied Telesis AT-BSTACK1 Quick Install Manual preview
AT-BSTACK1
Brand: Allied Telesis Pages: 34
TP-Link Deco XE200 User Manual preview
Deco XE200
Brand: TP-Link Pages: 57
IBM EtherLink XL User Manual preview
EtherLink XL
Brand: IBM Pages: 72
RadioSPECTRAL ICOM IC-7300 Installation Manual preview
ICOM IC-7300
Brand: RadioSPECTRAL Pages: 2
NETGEAR MA 301 Reference Manual preview
MA 301
Brand: NETGEAR Pages: 20
Option Audio GlobeSurfer X-1 User Manual preview
GlobeSurfer X-1
Brand: Option Audio Pages: 30

Brands by name

Popular brands

Load more brands