D-Link DGS-3100 SERIES Installation Manual Download Page 14

Page: 14 / 74

DGS-3100 Series Gigabit Stackable Managed Switch Hardware Installation Guide

LED Indicators

The LED indicators of the switch include Power, Console, RPS, Speed, and Link/Activity. The following figure shows the
LED indicators for the switch along with an explanation of each indicator.

Figure 1-7. LED Indicators

•

PWR

– Located on the front panel, the indicator is a solid green light when the system is powered up, and remains

dark when the system is off.

•

Console

– This indicator flashes green when the system is booting up. It remains solid green when the system is

operating properly. The LED is solid amber when the POST fails.

•

RPS

– This indicator is solid amber when the external Redundant Power Supply is on, and remains dark when it is

not in use or the main power supply is working.

•

Fan Err

–This indicator flashes red when any fans fail. The indicator remains dark (off) when all fans work

normally.

Summary of Contents for DGS-3100 SERIES











































































Search results

Summary of Contents for DGS-3100 SERIES

Reviews:

Related manuals for DGS-3100 SERIES

Brands by name

Popular brands

D-Link DGS-3100 SERIES, Installation Manual

Search results

Summary of Contents for DGS-3100 SERIES

Reviews:

Related manuals for DGS-3100 SERIES

Brands by name

Popular brands