D-Link DGS-1250 Series Page 16 Reference Manual Download

Page: 16 / 312

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

Click the

Exit

button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.

Click the

Next

button to accept the changes made and continue to the next step.

Step 3 - User Accounts Settings

In this step, we can configure the user account settings.

Figure 2-5 User Account Settings

The fields that can be configured are described below:

Parameter

Description

User Name

Select the user name here.

Password Type

Select the password type here. Options to choose from are:

•

None

- Specifies that no password will be configured for this user account.

•

Plain Text

- Specifies that the password for this user account will be in the

plain text form.

Password

After selecting

Plain Text

as the

Password Type

, enter the password for the user

account here.

Tick the

Ignore the wizard next time

option to skip the Smart Wizard on the next login.

Click the

Exit

button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.

Click the

Back

button to discard the changes made and return to the previous step.

Summary of Contents for DGS-1250 Series

























































































































































































































































































































Search results

Summary of Contents for DGS-1250 Series

Reviews:

Related manuals for DGS-1250 Series

Brands by name

Popular brands

D-Link DGS-1250 Series, Reference Manual

Search results

Summary of Contents for DGS-1250 Series

Reviews:

Related manuals for DGS-1250 Series

Brands by name

Popular brands