D-Link DGS-1100-05PDV2 Page 9 User Manual Download

Page: 9 / 56

1 Product Introduction

D-Link Smart Managed Switch User Manual

CAUTION:

The equipment power supply cord shall be connected

to a socket-outlet with earthing connection.

Le cordon d'alimentation de l'équipement doit être branché

sur une prise de courant dotée d'une connexion à la terre.

Rear Panel

Figure 1.8 – DGS-1100-08PV2 Rear Panel

Power:

Input for a 54V/1.574A AC adapter.

Kensington Lock:

This is used to attach a physical Kensington security lock.

GND:

This is used to connect the Switch to ground.

NOTE:

The power budget is 64 Watts for DGS-1100-08P.

LED Indicators

The Switches feature LED indicators for Power and Link/Act for each port. The following shows the LED

indicators for the DGS-1100-05V2/05PDV2/08V2/08PV2 switches along with an explanation of each

indicator.

Figure 1.9 –LED Indicators on DGS-1100 series

Location

Indicator LED

Color

Status

Description

Per Device

Power

Green

Solid Light The device is powered on.

Blinking

PoE Pass Through Off (DGS-1100-

05PDV2 only)

Light off

The device is powered off.

PoE Max.
(Only DGS-1100-

08PV2)

Red

Solid Light

When the power output to PDs is over

57W. No additional PDs can be

powered for safety consideration.

Blinking

If the user unplugged certain PDs and

made the PoE power budget left over

7W, the PoE MAX LED will blink 5

seconds.

Light off

When the power budget is using less

the 57W.

LED Per

10/100/1000

Mbps Port

Link/Act/Speed

Green/Amber

Solid Green Indicates there is a 1000 Mbps

connection on this port.

Blinking

Green

Indicates data is being processed on

this port at 1000 Mbps.

Summary of Contents for DGS-1100-05PDV2

























































Search results

Summary of Contents for DGS-1100-05PDV2

Reviews:

Related manuals for DGS-1100-05PDV2

Brands by name

Popular brands

D-Link DGS-1100-05PDV2, User Manual

Search results

Summary of Contents for DGS-1100-05PDV2

Reviews:

Related manuals for DGS-1100-05PDV2

Brands by name

Popular brands