4 Configuration
D-Link Smart Managed Switch User Manual
36
The fields that can be configured for
Port Rate Limiting
are described below:
Item
Description
From Port / To Port
Specify a range of ports to be configured.
Direction
Select the direction option. Options to choose from are:
Input:
This configures the transfer speed limit for ingress
traffic.
Output:
This configures the transfer speed limit for
egress traffic.
Both:
This configures the transfer speed limit for both
ingress and egress traffic.
Rate Limit
Specify the rate limit in kbps or Mbps. Or specify
No Limit
to
remove the rate limit.
Table 4.29
Click
Apply
to make the configurations take effect.
Security > Traffic Segmentation
This feature allows administrators to distribute traffic flow from a single port to a group of ports on a single
Switch. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more
restrictive.
Figure 4.46 – Security > Traffic Segmentation
The fields that can be configured for
Traffic Segmentation Settings
are described below:
Item
Description
From Port / To Port
Specify a range of ports to be configured as sources ports.
From Forward Port /
To Forward Port
Specify a range of ports to be configured as forwarding ports.
Table 4.30
Click the
Add
button to add a new entry.
Click the
Delete
button to remove an entry based on the information entered.
Security > Storm Control
The Storm Control feature provides the ability to control the receive rate of broadcast, multicast, and
unknown unicast packets. Once a packet storm has been detected, the Switch will drop incoming packets
until the storm has subsided.
Figure 4.47 – Security > Storm Control
The fields that can be configured for
Storm Control Settings
are described below:
Item
Description
Summary of Contents for DGS-1100-05PDV2
Page 56: ......
