D-Link DGS-1100-05PDV2, User Manual, Page: 26 / 56

4 Configuration
D-Link Smart Managed Switch User Manual
2 2 3 3
Community String
Specify the community string for the management host.
Table 4.10
Click
Apply
to make the configurations take effect.
Management > D-Link Discovery Protocol
For devices that support the D-Link Discovery Protocol (DDP), this page allows users to enable or disable
DDP, and configure the DDP packet report timer.
Figure 4.24 – Management > D-Link Discovery Protocol
The fields that can be configured for
D-Link Discovery Protocol are described below:
Item Description
D-Link discovery
Protocol State
Specify to enable or disable the D-Link discovery protocol feature of
the Switch.
Report Timer
Configure the report timer of the D-Link Discover Protocol in
seconds. The values are 30, 60, 90, 120 or Never. The default is 30
seconds.
Table 4.11
Click
Apply to make the configurations take effect.
L2 Features > FDB > Static FDB > Unicast Static FDB
The Unicast Static FDB page allows user to view and configure the static unicast forwarding settings on the
Switch.
Figure 4.25 – L2 Features > FDB > Static FDB > Unicast Static FDB
The fields that can be configured for Unicast Static FDB are described below:
Item Description
Port
Allows the selection of the port number on which the MAC address
entered resides.
VID
Enter the VLAN ID of the VLAN which the corresponding MAC
address belongs to.
MAC Address
Enter the MAC address to which packets will be statically forwarded
or dropped. This must be a unicast MAC address.
Table 4.12
Click
Apply to make the configurations take effect.
Click
Delete All
to delete all the entries found in the display table.