67
THE SETUP HOSTS TAB
The
Setup Hosts
tab lets you add new hosts and manage current hosts.
1. To view the
Setup Hosts tab,
click
Objects
>
Setup Hosts.
MAC Based Management / IP Based Management
After DFL-M510 connects into your network, the DFL-M510 can automatically learn
host information according to MAC or IP address information. In general circumstance,
MAC Based Management is enough to fulfill the deployment environment where a
switch is attached to the LAN port of your DFL-M510. However, if there is a router
attached to your LAN port, the DFL-M510 will recognize the router mac address only, it
cannot recognize the hosts automatically behind the routers, thus the IP Based
Management mode is required in order to have your DFL-M510 correctly recognize
the hosts behind your router.
Host Table
No.
Shows the current number of hosts
State
Shows the status for each host (refer to color legend at the bottom of
the screen)
Host/IP Address
Shows the host IP address
MAC
Shows the host MAC address
Summary of Contents for DFL-M510
