manualshive.com logo in svg

D-Link DFL-M510, User Manual, Page: 4 / 153

Share
Download
D-Link DFL-M510 User Manual Download Page 4

 

ii 

Gnutella (

)  is a registered trademark of OSMB, LLC 

Kazza (

)   is a registered trademark of Sharman Networks   

BitTorrent (

)  is a registered trademark of BitTorrent, Inc.   

DirectConnect (

)  is a registered trademark of Neo Modus Inc.   

PP365 (

)  is a registered trademark of pp365.com Inc.   

WinMX (

)  is a registered trademark of Frontcode Technologies   

GetRight (

)  is a registered trademark of Headlight Software. Inc. 

MS Media Player (

)   is a registered trademark of Microsoft Corporation   

iTunes (

)  is a registered trademark of Apple Computer, Inc.   

Winamp (

)  is a registered trademark of Nullsoft Inc. 

Player365 (

)  is a registered trademark of Live365, Inc.   

D-Link is a registered trademark of D-Link Systems, Inc. 

Java is a trademarks or registered trademark of Sun Microsystems, Inc. in the United 
States and other countries. 

All other product names used in this manual are the properties of their respective 
owners and are acknowledged. 

F e d e r a l   C o m m u n i c a t i o n s   C o m m i s s i o n   ( F C C )  

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 

z

 

Reorient or relocate the receiving antenna. 

z

 

Increase the separation between the equipment and the receiver. 

z

 

Connect the equipment onto an outlet on a circuit different from that to which the receiver 
is connected. 

z

 

Consult the dealer or an experienced radio/TV technician for help. 

 

Summary of Contents for DFL-M510


























































































































































Reviews:

No comments