manualshive.com logo in svg

D-Link DFL-M510, User Manual, Page: 3 / 153

Share
Download
D-Link DFL-M510 User Manual Download Page 3

 

i 

Before You Begin 

Before you begin using this manual, take a look at the copyright, trademark, and 
safety information in this section. 

Copyright 

This publication, including all photographs, illustrations and software, is protected 
under international copyright laws, with all rights reserved. Neither this manual, nor 
any of the material contained herein, may be reproduced without written consent of 
D-Link. 

Copyright 2006   

Version 1.02 

Disclaimer 

The information in this document is subject to change without notice. The manufacturer 
makes no representations or warranties with respect to the contents hereof and 
specifically disclaim any implied warranties of merchantability or fitness for any 
particular purpose. The manufacturer reserves the right to revise this publication and 
to make changes from time to time in the content hereof without obligation of the 
manufacturer to notify any person of such revision or changes. 

Trademark Recognition 

MSN 

(

)

 is a registered trademark of Microsoft Corporation   

ICQ 

(

)  

is a registered trademark of ICQ Inc.   

Yahoo

  (

)  

is a registered trademark of Yahoo! Inc.   

QQ 

(

)  

is a registered trademark of TENCENT Inc.   

Skype 

(

)

 is a registered trademark of Skype Technologies.   

IRC 

(

)

 is a registered trademark of mIRC Co. Ltd. 

Odigo 

(

)

 is a registered trademark of Comverse Technology, Inc. 

Rediff

  (

)

 is a registered trademark of rediff.com India Limited.   

ezPeer 

(

)  

is a registered trademark of Eastern Sky Ltd. 

Kuro (

)   is a registered trademark of music.com.tw Int.   

Summary of Contents for DFL-M510


























































































































































Reviews:

No comments