LAN RIP interface will disable the routing
function of your router.
Network Address
This is the IP address of either the LAN or WAN
side of your DFL-600.
Subnet Mask
This is the subnet mask corresponding to the
Network Address above.
Interface Name
This is the name of the interface corresponding
to the Network Address above.
Multicast Support
You can enable or disable multicast support. It
is recommended that you enable this feature.
Update Timer
This allows you to specify how often the DFL-
600 will update its routing table. The default is
30 seconds.
Timeout Timer
This allows you to specify how long a route
discovered by the DFL-600 will remain in its
memory without being used. The default is 180
seconds.
Garbage Collection
Timer
This allows you to specify the period of time
between the collection of garbage routes. The
default is 120 seconds.
Routing Information
Your DFL-600 can automatically discover routes to destinations on both your
LAN and the WAN (Internet), and you can also enter routing information
statically. To display the
Routing Information
table, click on the
Routing
Information
link. This information is displayed in the Routing Information
table, as shown below.