D-Link DFL-600 User Manual Download Page 96

Page: 96 / 131

PPoE Passthrough

The DFL-600 allows you to pass PPPoE authentication and connection
packets to a PC on your LAN that will then make the connection using
appropriate software to give the server at your ISP the appropriate username
and password, if necessary.

Tools

−

System

The

System Settings

page allows you to save th

DFL-600’s Flash RAM (NVRAM). Clicking the

Apply

configuration page will make the changes curren

Apply Settings and Restart

from the

System Settings

configuration into the DFL-600’s NVR
revert to the last saved configuration when it is restarted.

e current configuration to the

button on any given

t, but you must execute an

page to enter the

AM. If you do not, the DFL-600 will

ns for restarting the DFL-600

−

save settings and restart,

tory default settings. If you choose the

Restore Factory

There are two optio

r restart to the fac

Default Settings

option, all of the configuration settings you have entered

will be erased and the DFL-600 will be restored to the same configuration it
had when it left the factory.

Summary of Contents for DFL-600




































































































































Search results

Summary of Contents for DFL-600

Reviews:

Related manuals for DFL-600

Brands by name

Popular brands

D-Link DFL-600, User Manual

Search results

Summary of Contents for DFL-600

Reviews:

Related manuals for DFL-600

Brands by name

Popular brands