Fortinet FortiMail-5001A, Quick Start Manual

Page: 1 / 2

5001A
ASM-S08
HS
OOS
ACT/RDY
PORT
Straight-through
Ethernet cables
Console Cable
T
ools and Documenation
ASM-S08
HS
OOS
ACT/RDY
PORT
ASM-S08 storage module
Grounded wrist band
FortiMail-5001A
Hardware Guide
Copyright 2009 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
5001A
ASM-S08
HS
OOS
ACT/RDY
PORT
Welcome | Bienvenue | Willkommen | ㄫ | ᱑ㄫ | Bienvenido | Benvenuto
5001A
ASM-S08
HS
OOS
ACT/RDY
PORT
Port1 and Port2
10/100/1000
Copper Interfaces
USB
Fabric and Base
network activity
LEDs
AMC slot with ASM-S08
(80GB storage)
RJ-45
Console
Extraction
Lever
Retention
Screw
Extraction
Lever
Retention
Screw
IPM
LED
(board
position)
ACC
OOS
Power
Status
LEDs
For more information
• Documentation CD: all major FortiMail documents
• Fortinet Technical Documentation:
http://docs.fortinet.com
• Fortinet Knowledge Base: http://kb.fortinet.com
• Fortinet Technical Support: http://support.fortinet.com
• Fortinet Training Service: http://campus.training.fortinet.com
© Copyright 2010 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks or registered
trademarks of their respective holders.
Regulatory Compliance
FCC Class A Part 15, CE, and UL
Version 4.0
9 February 2010
http://www.fortinet.com
QuickStart Guide
FortiMail-5001A
Package Contents
Connectors
Factory default settings
Connector Type Speed Protocol Description
1, 2 RJ-45 10/100/1000
Base-T
Ethernet Copper 1-gigabit connection to
10/100/1000Base-T copper
networks.
CONSOLE RJ-45 9600 bps
8/N/1
RS-232
serial
Serial connection to the
command line interface.
USB USB Backing up or restoring mail data
in Server mode. For details, see
the FortiMail Administration
Guide on the documentation CD.
Default mode
Gateway mode
Administrator
account on Port 1
User name/
Password:
admin/(No password)
Web-based
manager URL:
https://192.168.1.99/admin
Management Access HTTPS, Ping, SSH
LED descriptions
LED State Description
1, 2
(Left LED) Green Port has power and network connection.
Flashing Green Network activity at the interface.
Off No link is established.
1, 2
(Right LED) Green Connection at 1 Gbps.
Amber Connection at 100 Mbps.
Off Connection at 10 Mbps.
Base CH0/CH1 Green Base backplane interface 0 (base1)/interface 1 (base2) is connected at 1 Gbps.
Flashing Green Network activity.
Fabric CH0/CH1 Off Fabric backplane interface 0 (fabric1)/interface 1(fabric2) is connected at 10 Gbps.
Flashing Green Network activity.
ACC Off or Flashing green Flashes green when the FortiMail-5001A board accesses the FortiOS flash disk. The FortiOS flash disk stores the
current FortiOS firmware build and configuration files. The system accesses the flash disk when starting up, during a
firmware upgrade, or when an administrator is using the CLI or GUI to change the FortiOS configuration. Under normal
operating conditions this LED flashes occasionally, but is mostly off.
OOS
(Out of
Service) Off Normal operation.
Green A fault condition exists and the FortiMail-5001A blade is out of service (OOS). This LED may also flash very briefly
during normal startup.
Power Green The FortiMail board is powered on.
Status Off The FortiMail board is powered on.
Flashing Green The FortiMail-5001A system is starting up. If this LED is flashing at any time other than system startup, a fault condition
may exist.
IPM Blue The FortiMail-5001A system is ready to be hot-swapped (removed from the chassis). If the IPM light is blue and no
other LEDs are lit the FortiMail-5001A board has lost power .
Flashing Blue The FortiMail-5001A system is changing from hot swap to running mode or from running mode to hot swap. This
happens when the FortiMail-5001A system is starting up or shutting down.
Off Normal operation. The FortiMail-5001A board is in contact with the chassis backplane.