D-Link DES-3010FA, Cli Manual

Page: 51 / 361

Clock
Page 50
clock summer-time
The clock summer-time Global Configuration mode command configures the system to automatically switch to
summer time (daylight saving time). To configure the software not to automatically switch to summer time, use the
no form of this command.
Syntax
clock summer-time recurring
{ usa | eu | }
| { week day month hh:mm week day month hh:mm }} [ offset offset ]
[ zone acronym ]
clock summer-time date date month year hh:mm date month year hh:mm [ offset offset ] [ zone acronym ]
clock summer-time date month date year hh:mm month date year hh:mm [ offset offset ] [ zone acronym ]
no clock summer-time recurring
Parameters
•
recurring — Indicates that summer time should start and end on the corresponding specified days every
year.
•
date — Indicates that summer time should start on the first specific date listed in the command and end on
the second specific date in the command.
•
week — Week of the month. (Range: 1 - 5, first , last )
•
day — Day of the week (Range: first three letters by name, like sun )
•
date — Date of the month. (Range:1 - 31)
•
month — Month. (Range: first three letters by name, like Jan)
•
year — year - no abbreviation (Range: 2000 - 2097)
•
hh:mm — Time in military format, in hours and minutes. (Range: hh: 0 - 23, mm:0 - 59)
•
offset — Number of minutes to add during summer time. (Range: 1 - 1440)
•
acronym — The acronym of the time zone to be displayed when summer time is in effect. (Range: Up to 4
characters)
•
usa - Summer time rules are the United States rules.
• eu - Summer time rules are the European Union rules.
Default Configuration
Summer time is disabled.
offset — Default is 60 minutes.
acronym — If unspecified default to the timezone acronym.
If the timezone has not been defined, the default is UTC.
Command Mode
Global Configuration mode