manualshive.com logo in svg

D-Link DES-3010FA, Cli Manual

Share
Download
D-Link DES-3010FA Cli Manual Download Page 291

User Interface

 Page 290 

help

The 

help

 command displays a brief description of the help system.

Syntax

help

Default Configuration

This command has no default configuration.

Command Mode

All command modes

User Guidelines

There are no user guidelines for this command.

Example

The following example describes the help system

.

Console# 

help

Help may be requested at any point in a command by entering a question mark '?'. If nothing 
matches the currently entered incomplete command, the help list is empty. This indicates 
that for a query at this point, there is no command matching the current input. If the 
request is within a command, enter backspace and erase the entered characters to a point 
where the request results in a display.
Help is provided when:
1. There is a valid command and a help request is made for entering a parameter or argument 
(e.g. 'show ?'). All possible parameters or arguments for the entered command are 
displayed.
2. An abbreviated argument is entered and a help request is made for arguments matching the 
input (e.g. 'show pr?').

Summary of Contents for DES-3010FA










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands