manualshive.com logo in svg

D-Link DES-3010FA, Cli Manual

The D-Link DES-3010FA is a versatile networking switch, providing efficient connectivity for homes and businesses. Its user manual offers comprehensive guidance on setup and usage. Experience hassle-free networking with this reliable device. Download the free manual now from manualshive.com and explore the full potential of your DES-3010FA.

Share
Download
background image

RMON Commands

 Page 200 

The following table describes significant fields shown above:

Field

Description 

Dropped

Octets

The total number of octets of data (including those in bad packets) received on the net-
work (excluding framing bits but including FCS octets).

Packets

The total number of packets (including bad packets, broadcast packets, and multicast 
packets) received.

Broadcast

The total number of good packets received and directed to the broadcast address. 
This does not include multicast packets.

Multicast

The total number of good packets received and directed to a multicast address. This 
number does not include packets directed to the broadcast address.

CRC Align Errors

The total number of packets received with a length (excluding framing bits, but includ-
ing FCS octets) of between 64 and 1518 octets, inclusive, but with either a bad Frame 
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS 
with a non-integral number of octets (Alignment Error).

Collisions

The best estimate of the total number of collisions on this Ethernet segment.

Undersize Pkts

The total number of packets received less than 64 octets long (excluding framing bits, 
but including FCS octets) and otherwise well formed.

Oversize Pkts

The total number of packets received longer than 1518 octets (excluding framing bits, 
but including FCS octets) and otherwise well formed.

Fragments

The total number of packets received less than 64 octets in length (excluding framing 
bits but including FCS octets) and either a bad Frame Check Sequence (FCS) with an 
integral number of octets (FCS Error) or a bad FCS with a non-integral number of 
octets (Alignment Error).

Jabbers

The total number of packets received longer than 1518 octets (excluding framing bits, 
but including FCS octets), and either a bad Frame Check Sequence (FCS) with an 
integral number of octets (FCS Error) or a bad FCS with a non-integral number of 
octets (Alignment Error).

64 Octets

The total number of packets (including bad packets) received that are 64 octets in 
length (excluding framing bits but including FCS octets).

65 to 127 Octets

The total number of packets (including bad packets) received that are between 65 and 
127 octets in length inclusive (excluding framing bits but including FCS octets).

128 to 255 Octets

The total number of packets (including bad packets) received that are between 128 
and 255 octets in length inclusive (excluding framing bits but including FCS octets).

256 to 511 Octets

The total number of packets (including bad packets) received that are between 256 
and 511 octets in length inclusive (excluding framing bits but including FCS octets).

512 to 1023 Octets

The total number of packets (including bad packets) received that are between 512 
and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

1024 to 1518 Octets

The total number of packets (including bad packets) received that are between 1024 
and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

Summary of Contents for DES-3010FA










































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3010FA

GE SE-100E Instructions Manual preview
SE-100E
Brand: GE Pages: 20
Hama S2100 Operating Instruction preview
S2100
Brand: Hama Pages: 18
Omega Engineering 430 Instruction Sheet preview
430
Brand: Omega Engineering Pages: 3
Eaton COOPER POWER SERIES Installation And Operation Instructions Manual preview
COOPER POWER SERIES
Brand: Eaton Pages: 16
United Electric Controls 54 Series Assembly, Installation And Operation Instructions preview
54 Series
Brand: United Electric Controls Pages: 6
Hirschmann PAT TRS 05 / PATB3 Installation And Setup Manual preview
PAT TRS 05 / PATB3
Brand: Hirschmann Pages: 12
Barco MatrixPRO 8x8 DVI Quick Start Manual preview
MatrixPRO 8x8 DVI
Brand: Barco Pages: 2
XtendLan MATRIX1608A User Manual preview
MATRIX1608A
Brand: XtendLan Pages: 24
IOGear GHDMIMS52 Quick Start Manual preview
GHDMIMS52
Brand: IOGear Pages: 1
Cable Electronics HSW44C Plus Instruction Manual preview
HSW44C Plus
Brand: Cable Electronics Pages: 16
LevelOne FGU-5021 Quick Installation Manual preview
FGU-5021
Brand: LevelOne Pages: 15
Hubner EGS 2 Operating And Assembly Instructions Manual preview
EGS 2
Brand: Hubner Pages: 23
Penguin Computing Arctica 1600cs Installation Manual preview
Arctica 1600cs
Brand: Penguin Computing Pages: 71
Pilz PSEN ma2.1p/ATEX Operating Instructions Manual preview
PSEN ma2.1p/ATEX
Brand: Pilz Pages: 8
Targus ACH129 User Manual preview
ACH129
Brand: Targus Pages: 30
Quick EBSN Series Manual For Use And Installation preview
EBSN Series
Brand: Quick Pages: 28
Acer ALH-616ds User Manual preview
ALH-616ds
Brand: Acer Pages: 32
Acer ALH-608ds User Manual preview
ALH-608ds
Brand: Acer Pages: 32

Brands by name

Popular brands

Load more brands