DES-30XX Layer 2 Switch CLI Reference Manual
67
show syslog host
Purpose
Used to display the syslog hosts currently configured on the Switch.
Syntax
show syslog host {<index 1-4>}
Description
The
show syslog host
command is used to display the syslog
hosts that are currently configured on the Switch.
Parameters
<index 1-4>
−
Specifies that the command will be applied to an index
of hosts. There are four available indexes, numbered 1 through 4.
Restrictions None.
Example usage:
To show Syslog host information:
DES-3026:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity Facility UDP port Status
------- --------------- -------------- -------- -------- --------
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3
DES-3026:4#
