DES-30XX Layer 2 Switch CLI Reference Manual
136
config radius add
Purpose
Used to configure the settings the Switch will use to communicate with a
RADIUS server.
Syntax
config radius add <server_index 1-3> <server_ip> key <passwd 32>
[default | {auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
Description
The
config radius add
command is used to configure the settings the
Switch will use to communicate with a RADIUS server.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS
server settings. Up to 3 groups of RADIUS server settings can be entered
on the Switch.
<server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used between
the Switch and the RADIUS server.
<passwd 32>
−
The shared-secret key used by the RADIUS server
and the Switch. Up to 32 characters can be used.
default
−
Returns all of the ports in the range to their default RADIUS
settings.
auth_port <udp_port_number 1-65535>
−
The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535>
−
The UDP port number for
accounting requests. The default is 1813.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure RADIUS server communication settings:
DES-3026:4#config radius add 1 10.48.74.121 key tomato default
Command: config radius add 1 10.48.74.121 key tomato default
Success.
DES-3026:4#
config radius delete
Purpose
Used to delete a previously entered RADIUS server configuration.
Syntax
config radius delete <server_index 1-3>
Description
The
config radius delete
command is used to delete a previously entered
RADIUS server configuration.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS
server settings. Up to three groups of RADIUS server settings can be
entered on the Switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete previously configured RADIUS server communication settings:
