DES-30XX Layer 2 Switch CLI Reference Manual
59
show utilization
Parameters
cpu
– Entering this parameter will display the current cpu utilization
of the Switch, as a percentage.
ports <portlist>
- Entering this parameter along with a list of ports
will display the current utilization of selected ports on the Switch.
Restrictions None.
Example usage:
To display the port utilization statistics:
DES-3026:4#show utilization ports 1-26
Command: show utilization ports 1-26
Port TX/sec RX/sec Util Port TX/sec RX/sec Util
---- ---------- ---------- ---- ---- ---------- ---------- ----
1 0 0 0 22 0 0 0
2 0 0 0 23 0 0 0
3 0 0 0 24 0 0 0
4 0 0 0 25 0 0 0
5 0 0 0 26 0 0 0
6 0 0 0
7 0 0 0
8 0 0 0
9 0 0 0
10 0 0 0
11 0 0 0
12 0 0 0
13 0 0 0
14 0 0 0
15 0 0 0
16 0 0 0
17 0 0 0
18 0 0 0
19 0 0 0
20 0 0 0
21 0 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
Example usage:
To display the CPU utilization statistics:
DES-3026:4#show utilization cpu
Command: show utilization cpu
CPU utilization :
-------------------------------------------------------------------------------
Five seconds - 15% One minute - 25% Five minutes - 14%
DES-3026:4#
