DES-30XX Layer 2 Switch CLI Reference Manual
17
enable telnet
Description
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” TCP port
for the Telnet protocol is 23.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable Telnet and configure port number:
DES-3026:4#enable telnet 23
Command: enable telnet 23
Success.
DES-3026:4#
disable telnet
Purpose
Used to disable the Telnet protocol on the Switch.
Syntax
disable telnet
Description
This command is used to disable the Telnet protocol on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable the Telnet protocol on the Switch:
DES-3026:4#disable telnet
Command: disable telnet
Success.
DES-3026:4#
enable web
Purpose
Used to enable the HTTP-based management software on the
Switch.
Syntax
enable web {<tcp_port_number 1-65535>}
Description
This command is used to enable the Web-based management
software on the Switch.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” port for the
Web-based management software is 80.
Restrictions Only
administrator-level users can issue this command.
Example usage:
