28
D-Link DCS-935L User Manual
Section 4 - Configuration
Internet Connection Setup Wizard
The Internet Connection Setup Wizard will guide you through a step-by-step process to
configure your DCS-935L and connect the camera to the Internet.
Click
Next
to continue.
Enter the
IP address
that the camera will use on your network. You can get this
information from your Internet Service Provider (ISP) or network administrator.
The default value is
255.255.255.0
. This value is used to determine if the
destination is part of the same network segment.
This value is the gateway used to forward data to destinations in a different
subnet. Invalid gateway settings may cause the failure of transmissions to a
different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the Primary DNS.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
• PPPoE
: If your camera is connected to the Internet through a DSL modem, you may check
the box by
PPPoE
.
(Most DSL providers use PPPoE.)
Enter the
User ID
and
Password
provided
by your ISP for your PPPoE account.
Click
Next
to continue.
Select what kind of Internet connection your camera should use.
• DHCP Connection
: This option should be selected if you have a DHCP server running
on your network and would like a dynamic IP address to be assigned to your camera
automatically.
• Static IP Address:
This option allows you to manually assign the network settings for
your camera. Click the radio button and enter the following details: