![background image](http://html.mh-extra.com/html/d-link/dcs-935l/dcs-935l_user-manual_77758030.webp)
30
D-Link DCS-935L User Manual
Section 4 - Configuration
Network
This section allows you to configure your network settings.
Select
DHCP Connection
if you have a DHCP server running on your network
and would like a dynamic IP address to be updated to your camera automatically.
Click this option to manually assign the network settings for your camea.
You
can obtain a static or fixed IP address and other network information from your
Internet service provider (ISP) or network administrator for your camera.
IP Address:
Enter the
IP address
that the camera will use on your network. You
can get this information from your ISP or network administrator.
Subnet Mask:
The default value is “255.255.255.0.” This value is used to determine
if the destination is part of the same subnet.
Default Gateway:
This value is the gateway used to forward data to destinations
in a different subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
Primary DNS:
Primary domain name server that translates names to IP addresses.
Secondary DNS:
Secondary domain name server to backup the Primary DNS.
If your camera is connected to the Internet through a DSL modem, you may
connect to the Internet using a PPPoE connection. (Most DSL providers use
PPoE.) Check the box to enable PPPoE, and enter the
User ID
(username) and
Password
for your PPPoE account. You can get this information from your ISP.
You can configure which ports to use for HTTP and RTSP (Real Time Streaming
Protocol) access to the camera. For example, you may configure a second HTTP
port for video streaming that will allow you to connect to the camera using a
standard Web browser. The port can be set to a number other than the default TCP
port of 80. A corresponding port must be opened on the router. For example, if
the port is changed to 1010, users must type
http://192.168.0.100:1010
instead
of just
http://192.168.0.100
.
DHCP
Connection:
Static IP Address:
PPPoE Settings:
Port Settings: