38
D-Link DCS-935L User Manual
Section 4 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use,
check with your e-mail provider (e.g., Gmail, Yahoo Mail, etc.).
SMTP Server
Address:
SMTP Server
Port:
Sender E-mail
Address:
Receiver E-mail
Address:
User Name:
Password:
Use SSL-TLS/
STARTTLS
Enter the domain name or IP address of your external e-mail server.
Enter the port number used by your external e-mail server. (The default value
is 25.)
Enter the
E-mail Address
listed as the sender for your notification e-mails.
Enter the
E-mail Address
that your notification e-mails will be sent to.
If the SMTP server uses authentication, enter your
User Name
.
If the SMTP server uses authentication, enter your
Password
.
Select one of these choices if your SMTP server requires SSL-TLS or STARTTLS
authentication. For example, if you want to use Gmail with SSL-TLS for e-mail
notifications, you can follow the steps below:
Step 1 - Enter
smtp.gmail.com
in
SMTP Server Address
field.
Step 2 - Change the
SMTP Server Port
number from 25 to
465
.
Step 3 - Enter your
Gmail e-mail address
in the
Sender E-mail Address
.
Step 4 - Enter the
destination e-mail address
in
Receiver E-mail Address
.
Step 5 - Enter the
User Name
required to access the SMTP server.
Step 6 - Enter the
Password
required to access the SMTP server.
Step 7
- Select
SSL-TLS
and then click
Save Settings
.
Step 8 - Click the
Test
button to send a test e-mail.
Note:
You can also use STARTTLS, which will use SMTP server port number 587. If you
want to use a Yahoo SMTP server, the SMTP server address will be different between
each registered region, and only SMTP port 465 is supported for SSL-TLS.
Click
Save Settings
to save your changes.