26
D-Link DCS-935L User Manual
Section 4 - Configuration
Icon
Button Name
Function
Full Screen
Click to display the video from your camera at full screen.
Snapshot
Click to take a snapshot of the image currently displayed
on the screen and save it to the hard drive in the folder
specified using the
Storage Folder
button.
Video Recording
Click to trigger the camera’s recording function. This will
record the video displayed on the screen and save it to
the hard drive in the folder specified using the
Storage
Folder
button.
Storage Folder
Click to select a
Storage Folder
for saving snapshots and
video recordings to.
Listen
Click to send the sounds detected by the camera’s
microphone to the PC’s speakers so you can listen to
the audio.
IR LED On/Off
Turns the Infrared lights on or off.
(This button only appears when you enable the manual
IR option, which can be found under the
Setup
>
Day/
Night Mode
section. Refer to
“Day/Night Mode” on page
43
.)
Zoom
Zooms in or out of the picture. Click the button (1x, 2x,
etc.) to adjust the level of digital zoom applied to the
image.
The buttons described in the table below are located at the bottom of the Live Video screen.