![background image](http://html1.mh-extra.com/html/d-link/dcs-7510/dcs-7510_user-manual_3364173040.webp)
40
D-Link DCS-7510 User Manual
Section 3 - Configuration
Enable UPnP:
Enable UPnP port
forwarding:
Enable PPPoE:
HTTP port:
RTSP port:
Universal Plug & Play (UPnP) allows Windows PCs to find this
camera under “Network Neighborhood” without configuration.
Enables your camera to add port forwarding entries into the router
automatically.
Select this option if you are using a PPPoE service and enter
the
User Name
and
Password
for your PPPoE account. You can
get this information from your Internet service provider (ISP).
This is the port that allows the user to connect to the
camera’s
user interface. By default the port is set to 80. You may change
the port number if using multiple cameras.
This is the port that you use for RTSP streaming to mobile
devices or PDAs. By default the port is set to 554. You may
change the port number if using multiple cameras.
Click
Save Settings
to save your changes, or click
Don’t Save Settings
to discard your changes.
Note:
Make sure you set up your router/gateway for Port Forwarding/Mapping; this will enable remote viewing of your
camera via the Internet. Please refer to your router’s instruction manual on how to forward ports.
Summary of Contents for DCS-7510
