![background image](http://html1.mh-extra.com/html/d-link/dcs-7510/dcs-7510_user-manual_3364173048.webp)
48
D-Link DCS-7510 User Manual
Section 3 - Configuration
Select the pre-defined profile you wish to use to record
video.
Select to adjust how much free space must remain when
recording. It is suggested that you set this to at least 32MB
to allow for enough buffer space for the camera to record
with.
When your storage device is full or has reached the free
space limit specified in
Record until
, you can choose to stop
recording, or you can have the camera delete old recordings
to free space for new recordings to be saved.
Allow you to record video when specific events happen.
Enabling this option will set the camera to record video when
motion is detected by the camera.
Preset amount of time before motion recording is triggered.
Preset amount of time after motion recording is triggered.
Example:
Using motion detection triggered recording and
setting Prerecord to 5 seconds and Postrecord to 9 seconds,
the camera will save video from 5 seconds before motion was
detected to 9 seconds after motion was detected.
This will set the camera to record continuously.
Select to manually configure the start and end time for
recording.
Resolution:
Record until:
When
Storage
is
full:
Event Based:
Motion detection
triggered recording:
Prerecord:
Postrecord:
Continuous:
Scheduled:
Recording
Options
Click
Save Settings
to save your changes, or click
Don’t Save Settings
to discard your changes
.
Summary of Contents for DCS-7510
