![background image](http://html.mh-extra.com/html/d-link/dcs-5230l/dcs-5230l_user-manual_77649027.webp)
22
D-Link DCS-5230L User Manual
Section 4 - Configuration
Site survey:
Click the
Rescan
button to scan for available wireless networks. After
scanning, you can use the dropdown box to select an available wireless network. The
related information (SSID, Wireless Mode, Channel, Authentication, Encryption) will be
automatically filled in for you.
SSID:
The SSID of the wireless access point you wish to use.
Wireless Mode:
Use the dropdown box to select the mode of the wireless network you
wish to connect to.
Infrastructure
is normally used to connect to an access point or
router.
Ad-Hoc
is usually used to connect directly to another computer.
Channel:
If you are using Ad Hoc mode, select the channel of the wireless network you
wish to connect to, or select
Auto
.
Authentication:
Select the authentication you use on your wireless network -
Open
,
Shared (WEP)
,
WPA-PSK
, or
WPA-PSK2
.
Encryption:
If you use
WPA-PSK
or
WPA-PSK2
authentication, you will need to specify whether your wireless network uses TKIP or
AES encryption. If you use
Open
or
Shared
authentication, this setting will be automatically set for you.
Key:
If you use
WEP, WPA-PSK
, or
WPA-PSK2
authentication, enter the
Key
(also known as password) used for your wireless
network.
After making any changes, click the
Save Settings
button to save your changes, or click the
Don’t Save Settings
button to discard your changes.
Wireless
To set up your IP camera’s wireless network interface settings, enable
Wireless Settings
in this window first. Then
continue the further configuration next.
Summary of Contents for DCS-5230L
Page 1: ......