40
D-Link DCS-5009L User Manual
40
Section 4 - Configuration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enter the IP address of the FTP server that you will be connecting to.
Enter the port number of the FTP server that you will be connecting
to. (Default value is 21.)
Enter the
User Name
of your FTP server account.
Enter the
Password
of your FTP server account.
Enter the destination path/folder to save files to on the FTP server.
Click
Yes
to enable passive mode if your camera is behind a router
protected by a firewall.
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Enable
uploading of
images to an
FTP server:
Image
Frequency:
Base File Name:
Check the box to enable uploading of snapshots to an FTP server.
Images will be uploaded as specified below.
• Click
Always
to upload snapshots continuously based on the
Image Frequency
specified.
• Click
Schedule
to set a schedule for starting and stopping the
uploading of snapshots.
• Select
Motion Detection
if you would like the camera to upload
images only when motion is detected.
Set how frequently you want images to be taken and uploaded. You
can specify a number of frames per second, and a number of seconds
per frame.
Enter the desired base file name for your snapshots. Keep in mind
that the base file name will also include the time stamp information.