38
D-Link DCS-5009L User Manual
38
Section 4 - Configuration
SMTP Server
Address:
SMTP Server
Port:
Sender E-mail
Address:
Receiver E-mail
Address:
User Name:
Password:
Use SSL-TLS/
STARTTLS:
Enter the domain name or IP address of your external e-mail server.
Enter the port number for the SMTP Server. The default value is 25,
and should only be changed if suggested by your e-mail provider.
Enter the e-mail address to be listed as the sender for your notification
e-mails.
Enter the e-mail address that your notification e-mails will be sent to.
If the SMTP server uses authentication, enter your
User Name
.
If the SMTP server uses authentication, enter your
Password
.
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use,
check with your e-mail provider (e.g., Gmail, Yahoo Mail, etc.)
Select a protocol for security. For example, if you want to use Gmail
with SSL-TLS for e-mail notifications, you can follow the steps below:
Step 1 - Enter
smtp.gmail.com
in the
SMTP Server Address
field.
Step 2 - Change the
SMTP Server Port
number from 25 to
465
.
Step 3 - Enter your Gmail e-mail address in
Sender E-mail Address
.
Step 4 - Enter the destination e-mail address in
Receiver E-mail Address.
Step 5
-
Enter the
User Name
required to access the SMTP server.
Step 6 - Enter the
Password
required to access the SMTP server.
Step 7 - Select
SSL-TLS
and then click
Save Settings
.
Step 8 - Click the
Test
button to send a test e-mail to the account
listed above.
Note:
• You can also use STARTTLS, which will use SMTP server port number
587
.
• If you want to use a Yahoo SMTP server, the SMTP server address will
be different between each registered region, and only SMTP port
465
is
supported for SSL-TLS.
