background image

57

D-Link DCS-4602EV User Manual

Section 3: Configuration

Motion 

Detection 

Setting:

Percentage:

Sensitivity:

Enable this to enable the motion detection feature of your camera. Please 

note that you must create at least one motion detection box for the camera 

to detect motion.

Set how much of the area being monitored for motion must change for 

motion to be detected. A low percentage means that only part of the area 

being monitored has to change to detect motion, and a high percentage 

means that most of the area needs to change to detect motion.

Low percentages can be useful when monitoring an area such as a large 

room, and high percentages can be useful when you are only monitoring a 

specific part of the camera's view, such as a doorway.

Set how sensitive motion detection will be from 0% to 100%. A low sensitivity 

means that there must be large changes between two images in order to 

detect motion, and a high sensitivity means that even small changes will 

cause motion to be detected.

Low sensitivities may be useful when monitoring an area that has flickering 

lights or a window to the outside in view. High sensitivities may be useful 

when monitoring an area that rarely changes, such as a storeroom or 

warehouse.

Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that determine whether 

motion is detected by the camera or not. After making any changes, click the 

Save 

button to save your changes.

Motion

Summary of Contents for DCS-4602EV





























































































Reviews: